/

·

No. 138

How to Sync Audio From a Separate Recorder to Video

·

by

A handheld field audio recorder against a blurred green background

Key takeaways

  • Record a rough audio track on the camera too. Waveform sync works by matching that track to the recorder's audio, so a camera with its mic switched off gives the software nothing to match.

  • Clap once at the start of every take, as a backup you can see and hear in the timeline.

  • DaVinci Resolve, Final Cut Pro and Kdenlive can all line up clips automatically from their audio. Premiere Pro merges clips by in points, out points, timecode or markers.

  • Mute or replace the camera audio only after you've checked the sync.

  • Check the sync near the end of long clips as well as at the start.

What you need

  • A camera that records a scratch track, even a poor one.

  • A separate recorder, lav kit or phone recording the good audio.

  • A video editor.

  • Something to clap with, or a slate.

  • Headphones, for checking the sync by ear.

Step 1: Record a scratch track on the camera

Leave the camera's built-in microphone on, even if you're also feeding it a better mic. The audio will sound thin, and that's fine. The editor compares the shape of that sound to the recorder's version and lines the two up. Final Cut Pro's help and the Kdenlive manual both say audio sync needs similar audio content in the two clips, and Kdenlive calls for "almost identical" audio. Put the recorder within a few feet of the camera, or the two tracks will differ too much to match.

Step 2: Clap at the start of every take

Start the recorder, start the camera, then clap once in front of the lens with your hands in frame. The clap makes a sharp spike on the waveform and a visible frame where the hands meet, so you can line up a take by eye if the automatic sync fails. Premiere Pro's own help describes in points as acting like a slate clap. Do it again at the end of a long take, which also helps with checking drift later.

Step 3: Match your settings

Record at 48 kHz, the sample rate most video editors use, and set the recorder and the camera to the same frame rate and project settings where you can. Mismatched sample rates can create extra conversion work. Give each recorder file a name that matches its camera clip, such as the scene and take number, or note the clip names in a log. If your gear supports timecode, jam sync it to the camera before you shoot, since timecode lets an editor line clips up without any audio. Tentacle Sync, for example, lists drift of under one frame in 24 hours for its timecode generator.

Step 4: Bring everything into your editor

Copy the camera files and recorder files into the project folder and import both. Don't rename them after importing, or you may have to relink media. Keep each recorder file next to the camera clip it belongs to, so a quick look tells you which pair is which.

Step 5: Sync automatically

Pick the steps for your editor.

  • DaVinci Resolve: In the Media Pool, select the video clips and the recorder's audio clips, then right-click and choose Auto Sync Audio. Pick Based on Waveform. In version 20.1 and later the dialog has a Synchronize Using menu that offers Waveform, Timecode, In point, Out point and Marker. The Append Tracks versions keep the camera audio on its own track beside the new audio, and the plain versions replace it.

  • Final Cut Pro: Select the video and audio clips in the browser, then choose Clip > Synchronize Clips (Option-Command-G). Check Use audio for synchronization, and check Disable audio components on AV clips if you'd rather silence the camera's audio inside the synced clip. Final Cut makes a new synchronized clip and leaves the originals unchanged. Apple notes audio sync can take a while and some recordings don't sync well.

  • Premiere Pro: Select the video clip, then Shift-click or Command-click the recorder's audio clip and choose Clip > Merge Clips. Choose a sync point of In Points, Out Points, Timecode or Clip Marker. Set an in point on the clap in each clip first. The merged clip holds up to 16 audio channels and leaves your source clips untouched. Premiere's help lists audio-waveform auto-sync as a feature merged clips don't support, so the clap marks matter.

  • Kdenlive: Put the clips on the timeline, right-click the camera clip and choose Set Audio Reference. Then right-click the recorder clip and choose Align Audio to Reference.

An older tool, PluralEyes, was discontinued in February 2024, and Maxon points its users to the sync built into editors.

Step 6: Sync by hand if automatic sync fails

Noisy rooms and distant camera mics can defeat automatic sync. Zoom in on the timeline until you can see the clap as a tall spike in both the camera track and the recorder track. Drag the recorder clip until the two spikes sit on the same frame, then play the clap with headphones on. If you hear an echo, slide the clip a frame at a time until it disappears. Then link the video and audio clips, so they move together.

Step 7: Silence the camera audio

Once the sync looks right, mute the camera's scratch track or delete it from the timeline, and keep only the recorder's audio. Leave the scratch track alone until you've checked the whole clip, since you might want it for a second pass.

Step 8: Check the sync at the start, middle and end

Play a few seconds near the beginning, the middle and the end of every long clip with headphones on. Watch a person's lips for any lag. Recorders and cameras run on separate clocks, so on long takes the audio may drift out of sync gradually. If you see it, cut the clip into sections, sync each section on its own using the clap or a clear sound as the marker, and join them again.

Common mistakes

  • Turning the camera mic off. Waveform sync needs a scratch track to match.

  • Skipping the clap. A clap gives you a manual fallback when automatic sync can't decide.

  • Checking only the start. Drift shows up at the end of a long take.

  • Recording from different distances. If the recorder and camera are far apart, the sounds differ too much to match.

  • Deleting the scratch track too soon. Keep it until the whole project is locked.

Frequently asked questions

Do I need a clap to sync audio?

No, but it helps. Automatic sync can work from the camera's scratch track alone, and a clap gives you an obvious spike to line up by hand when the software gets it wrong.

Can I sync audio if the camera didn't record sound?

Not by waveform, because there's no sound to match. You can sync by markers or in points if you noted a moment both devices captured, or by timecode if both were jam synced. Otherwise you'll line the audio up by eye on a visible cue.

Why does my audio drift out of sync?

The camera and the recorder keep time with separate clocks, so they run at very slightly different speeds. The gap is small, but it grows over a long recording. Cutting long clips into sections and syncing each one fixes it.

What is the best software for syncing audio and video?

DaVinci Resolve, Final Cut Pro and Kdenlive all sync clips from audio, and Premiere Pro merges clips by markers, in points and timecode. Use whichever editor you already edit in.

What sample rate should I record at?

48 kHz is the standard for video and the safest choice, so set your recorder to it and match your project settings.